Aubrey Gravel Co
Aubrey, TX · Denton County
Home/Gravel Driveway Cost Aubrey TX
Price Guide • Aubrey TX • Denton County

Gravel Driveway Cost in Aubrey TX

What you'll actually pay for gravel driveway installation and repair in Aubrey TX and Denton County, based on real project scopes.

Aubrey TX Gravel Driveway Price Ranges

Scope of WorkTypical Range
Spot repair / pothole fill$200-$600
Top-dressing (200 ft drive)$500-$1,100
Regrade + top-dress (200 ft)$1,200-$2,500
New install, 100-150 ft$1,200-$2,500
New install, 200-300 ft$2,500-$5,000
New install, 400-600 ft$4,000-$9,000
Culvert installation$400-$900
Full regrade + rebuild$1,500-$5,000

Estimates for Aubrey TX and Denton County. Actual quotes depend on site conditions, access, and material prices at time of work.

What Drives Gravel Driveway Cost in Aubrey TX

Material and labor are the two main cost components, and both scale with driveway length and base depth. A 4-inch compacted crusher run base on a 200-foot driveway requires roughly 12 to 15 tons of road base material. A 6-inch base for a heavy-use driveway uses 50 percent more material at the same footprint. Top surface material (crushed limestone) adds another 6 to 10 tons for that same 200-foot run at 2 to 3 inches depth.

Site conditions matter too. A driveway on firm, level ground with easy equipment access costs less per foot than one on a slope, in a wet area, or where equipment can only enter from one direction. Properties requiring vegetation clearing before base work add to the total. Culvert installation at the road apron adds a fixed cost regardless of driveway length.

Denton County culvert/driveway permits for new road entrances don't cost much to file but add 10 working days to the schedule. That's worth planning for if you're working toward a construction start date.

Gravel vs. Concrete vs. Asphalt: A Quick Comparison

For a 200-foot single-lane driveway at current North Texas prices:

  • Crushed limestone gravel: $2,500-$4,500 (plus annual maintenance)
  • Asphalt: $14,000-$28,000 (reseal every 5-7 years)
  • Concrete: $16,000-$36,000 (crack repair as needed)

For long driveways on acreage properties, gravel is almost always the financially practical choice. For shorter driveways where paving is more competitive, gravel's lower upfront cost is offset by annual maintenance. A site quote resolves the comparison for your specific property.

Get a Free Driveway Estimate

No obligation. We'll be in touch within one business day.

Why Prices Vary
  • Driveway length and width
  • Required base depth (4 vs 6 inch)
  • Site prep difficulty
  • Culvert needed at road
  • Current material pricing
  • Equipment access constraints

Get an Exact Quote for Your Aubrey Driveway

The ranges above are ballparks. A site visit gives you the actual number for your specific property.

Get a Free Estimate
Our Services
Nearby Areas
Also Read

Gravel Driveway Cost in Aubrey TX: Common Questions

What is the average cost to install a gravel driveway in Aubrey TX?
A standard residential gravel driveway in Aubrey runs $1,200 to $6,000 installed, depending on length, width, base depth, and material. A 200-foot single-lane driveway with a 4-inch crusher run base and crushed limestone top typically runs $2,500 to $4,000. Shorter driveways on already-prepared ground can be done for $1,200 to $1,800. Long rural driveways over 400 feet or those needing a culvert at the road add to those figures. The most accurate way to know what your job will cost is a site visit, we quote flat per-job after measuring and assessing ground conditions.
What factors affect gravel driveway cost the most?
Length and width are the biggest variables. A 100-foot driveway takes roughly half the material and labor of a 200-foot one. Base depth matters too: a 6-inch base on heavy-traffic driveways uses 50 percent more base material than a 4-inch base. Material choice affects cost, crushed limestone and crusher run are the most cost-effective durable options. Culvert installation adds $400 to $900 depending on pipe size. Site prep difficulty, steep grade, wet ground, clearing required, also affects the quote.
How much does gravel driveway repair cost in Aubrey?
Spot repairs and top-dressing on a standard 200-foot driveway run $500 to $1,800. Full regrading with top-dressing for a washed-out or badly rutted driveway runs $1,200 to $3,500. Culvert replacement adds $400 to $900. The wide range reflects the significant variation in what different driveways need: a driveway that just needs a top-dress pass is very different from one that needs the top material pulled, base rebuilt, and then resurfaced.
Is gravel cheaper than concrete or asphalt for a driveway in Denton County?
Yes, significantly. Concrete driveways in Aubrey run $8 to $18 per square foot installed, putting a 200-foot single-lane driveway at $16,000 to $36,000. Asphalt runs $7 to $14 per square foot ($14,000 to $28,000 for the same run). Gravel at $2,500 to $4,000 for the same driveway is 4 to 10 times cheaper. The tradeoff is ongoing maintenance: gravel needs an annual top-dressing pass, while concrete and asphalt need less frequent attention. For long rural driveways where paving cost is prohibitive, gravel is often the only practical choice.
Does a longer driveway cost proportionally more?
Most of the cost is material and equipment time, which scales roughly linearly with length. There's some economy of scale on longer runs, mobilization cost is fixed regardless of driveway length, so it spreads over more footage on a longer job. A 500-foot driveway doesn't cost 2.5 times what a 200-foot one does. But the savings aren't dramatic. We quote flat per-job rather than per-foot, so the total quote will reflect the actual scope.